OUTSIDE MAINTENANCE BOX 25PCS

**MADE IN THE USA** **Double Insulated** **Lifetime Warranties** (90-Day Warranty for Ratchets and Torque Wrenches) *These tools meet the specification for **Electric Vehicle Maintenance** * **Manufactured for use in compliance with:** - Meets IEC 60900 Standard for Insulated Hand Tools - Exceeds ASTM 1505 Standards for Insulated Hand Tools - Helps meet OSHA Requirements 29 CFR Part 1910.331-335 - Subpart S; 29 CFR Part 1910.269 Subpart K - Meets NFPA 70E Requirement - Tested to 10,000VAC and rated for 1,000VAC/1500VDC Maximum Exposure - Impact Resistant and Flame Retardant --- !!!KITINCLUDES | Part # | Item | | --- | --- | | 30840 | SCREWDRIVER ROUND BLADE SLOTTED 1/4" X 7" | | 66-158 | SCREWDRIVER PHILLIPS #2 X 8" | | 30808 | NUT DRIVER 3/8" X 3" | | 30809 | NUT DRIVER 7/16" X 3" | | 30810 | NUT DRIVER 1/2" X 3" | | 66-818 | NUT DRIVER 9/16" X 3" | | 5008 | PLIER DIAGONAL HEAVY DUTY 7" | | 5018 | PLIER NEEDLE NOSE, WITH CUTTER 7" | | 5030 | PLIER LINESMAN 9" | | FL | Flashlight | | 250R-3/8 | TORQUE WRENCH 3/8"DR 11.5" LONG 50-250 IN/LB | | 1269 | RATCHET 3/8" DRIVE 8" | | 11805F | EXTENSION 3" 3/8DRIVE FLARE END | | 11810F | EXTENSION 6" 3/8DRIVE FLARE END | | 11-927F | EXTENSION 12" 3/8DRIVE FLARE END | | 11258 | SOCKET DEEP 3/8" 3/8DR 12 POINT | | 11259 | SOCKET DEEP 7/16" 3/8DR 12 POINT | | 11260 | SOCKET DEEP 1/2" 3/8DR 12 POINT | | 11261 | SOCKET DEEP 9/16" 3/8DR 12 POINT | | 11262 | SOCKET DEEP 5/8" 3/8DR 12 POINT | | 11263 | SOCKET DEEP 11/16" 3/8DR 12 POINT | | 11264 | SOCKET DEEP 3/4" 3/8DR 12 POINT | | 11265 | SOCKET DEEP 13/16" 3/8DR 12 POINT | | 58014 | HEX WRENCH 3/16" TYPE L LONG ARM | | 58018 | HEX WRENCH 1/4" TYPE L LONG ARM | | 58020 | HEX WRENCH 5/16" TYPE L LONG ARM | | 58022 | HEX WRENCH 3/8" TYPE L LONG ARM | | 8010 | PLIER TONG AND GROOVE 10" | | IT-Pouch | Tool Pouch | | GTO Case | Great Tool Organizer | --- All necessary company safety practices for use of insulated tools should be followed and assigned per company/corporation safety policy/program. OEL Worldwide Industries does not assume liability for the improper care and/or use of insulated tools. Visual inspections and routine testing should be performed per necessary standards. OEL Worldwide Industries cannot anticipate all conditions under which this information and its products, or the products of other manufacturers in combination with its products, may be used. Users are advised to make their own tests to determine the suitability of each product or product combination for their own purposes.